My DStv Decoder is not scanning
My DStv decoder is not scanning error message is common, especially with new DStv installations or when you are using an older model decoder. It is easy to identify this problem thanks to the error message displayed on the TV. Your decoder will also indicate the specific light option. Once you spot these, you can begin fixing the problem.
What causes my DStv decoder is not scanning error?
The main cause for my DStv decoder not scanning is poor signal reception by your decoder. Often, the problem comes from your satellite dish or smart LNB.
- If they are installed incorrectly, you will get this error message.
- Common in DIY dish installations where the right tools weren’t used.
Another cause for my DStv decoder is not scanning error message is poor weather.
- Your DStv signal will be affected greatly by the weather in your area.
If it is raining or there is a storm, you will experience signal interruptions, and the decoder will refuse to scan. Most of the causes for my DStv decoder is not scanning error message can be corrected with simple DStv fixes.
How to fix my scanning error?
When you get this error message, the first thing to do is check the weather. If it is raining or there is a storm, it could be a cause of this error. First, wait for the weather to get better and see whether the problem persists. If it does, you can now check your satellite dish and smart LNB.
Ensure your satellite dish is facing the right direction eastwards. It should also have the right angle of elevation to ensure it is getting a stronger signal. The satellite has a degree measurement to maintain while setting it up to ensure you don’t get the scanning error.
The smart LNB should also be connected firmly and all its cables connected to the right ports.
- If the smart LNB is damaged, you need to replace it with another one from an accredited installer.
Following these processes will help, and you can begin watching again!
https://myofflinestash.com/dstv-decoder-stuck-on-scan-searching-for-signal
