Having a good DStv signal will ensure you have the highest picture quality. It will also ensure you never miss any of your favourite shows and that you get the most from your DStv Package. One challenge you are likely to encounter while using your DStv is how to install DStv signal for your decoder. It is an important aspect of your DStv installation and should be done correctly.
Tips on how to install signal
Before your decoder can broadcast channels on your tv, it has to receive signals from your satellite dish. It is one of the most vital parts of your DStv connection, and without a dish, you cannot get any signal. When learning how to install DStv signal, connecting your dish is the best place to begin from.
When you buy your decoder, you will receive the dish and other accessories for the connection. There are four strong screws, an antenna base, and a connecting cable.
How to install the DStv dish
When you purchase your DStv, you will get four screws to connect the antenna base. You should ensure it is placed in a high area and is not blocked by trees or buildings. These could affect the signal strength. Multichoice will advise you on the right direction to face your dish, and you can drill holes into the wall and place your antenna base.
Ensure it is strong enough and can withstand strong winds. You can now screw your dish onto the antenna base to complete this assembly. You can now run the RG-6 from your dish to the DStv decoder and connect it to a port at the back. It is well indicated, and you will find it with ease. Once the technical part is done, you can now install the DStv signal.
How to repair the DStv signal
You will only need your remote to initiate the setup wizard on your decoder. It will scan for a signal, and after a while, it will show the signal strength and begin showing the channels. Ensure you are first connected to channel 100 and that it has a good picture quality. This is how to install DStv signal to your decoder, and you can now watch all your favourite shows.
